Use with the CHLOR*RID SP8 RINSE!
CHLOR*RID™ SP8 Gel
CHLOR*RID SP8 GEL
Eco Friendly, Bio-degradable, and Approved for runoff into coastal waters!
Non-Hazardous Rated
There is nothing like this in the industry! If you've blasted and have lost the blast to Flash Rust, you no longer have to go through all the re-work!!
This is a 2-step process. Spray on the SP8 Gel about 12-14 mils thick, and let it sit for 20-30 minutes. Wash it off with a mixture of the SP8 Rinse and water and it completely removes all the flash rust, taking you back to the original blasted surface!!
| •FIELD APPLIED PICKLING AGENT | • NOT AN INHIBITOR AND DOES NOT LEAVE A FILM | •IMPROVE COATING ADHESION UP TO 66% | • SIGNIFICANTLY EXTEND COATING SERVICE LIFE | • ELIMINATE WEATHER DELAYS |
| •REMOVES FLASH RUST | SAVE TIME ON UNNECESSARY REWORK | •BIODEGRADABLE & EASY TO SHIP WORLDWIDE | • REDUCE PROJECT COSTS UP TO 40% | • EASY TO USE |
- ci-chlor-rid-sp8-gel-full-page-flyer-flat.pdf PRODUCT FLYER
- chlor-rid-sp8-gel-application-procedures-oct-2024.pdf PRODUCT APPLICATION
- chlor-rid sp8 gel safety data sheet.pdf SAFETY DATA SHEET
- chlor-rid sp8 gel product data sheet.pdf PRODUCT DATA SHEET