HoldTight®102 Salt Remover & Flash Rust Preventer

KILLS chlorides and STOPS flash rust in one pass. It leaves no residue!

• HoldTight®102 provides superior performance at competitive prices in all applications: atmospheric and immersion; high and low temperature; low and high humidity. In hundreds of tests on all types of coatings HoldTight® 102 usually improved adhesion.
• * No Flash Rust for 48 hours or more – often 3 to 5 days
• * No Salts or other Non-Visible Contaminants * No Detectable Residue
• * Non-Toxic, Biodegradable, Non-Flammable
• * Approved or accepted by almost all coating manufacturers Available in one-gallon and five-gallon containers. 

See HoldTight®102 In Action!

• SDS Sheet A single component salt removing, flash rust preventing, and degreasing additive. Use to remove all contaminants including salts, oil, and blast residue. Use this product in conjunction with power washing, power wash after dry abrasive blasting, wet abrasive blasting, or waterjetting. HoldTight® 102 is also effective when used with hand tool or power tool cleaning.
• PDS Data Sheet Conforms to OSHA CFR 29 1910.1200 and aligns to the United Nations Globally Harmonized System ConformstoTheUnitedNationsRegulationGloballyHarmonizedSystem Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II – Europe Conforms to Regulation (EC) No 1272/2008 and aligns to the United Nations Globally Harmonized System